top of page

Paint Protection Perfection: Transforming a Skoda Octavia VRS with a 3 Year Ceramic Coating

  • Writer: kyle
    kyle
  • 3 days ago
  • 3 min read

The Ultimate Shield for Your Performance Machine


Modern performance cars, like this stunning Race Blue Skoda Octavia VRS, deserve the ultimate in paint protection. This is more than just a quick wash, it’s a detailed, multi stage restoration and protection process to ensure the paintwork looks better than new and stays that way for years to come.

Our client entrusted us with their VRS for two days to undergo a comprehensive service, culminating in a three year ceramic coating installation. Our philosophy is simple - preparation is everything. You can't put a professional grade coating on a compromised surface. Our Story


Stage 1: The Deep Clean Foundation

Before any machine polishing or protection can begin, the vehicle must be surgically clean. This initial phase removes every particle of dirt, debris, and contamination that has bonded to the paint over time.


Engine Bay Detail

  • Safety First: We started with the engine bay, covering and waterproofing the exposed air filter to protect it from moisture during the cleaning process.

  • Detailing: The bay was thoroughly cleaned to remove dirt, excessive grease, and general road debris, tidying up the entire compartment.

Blue car with open hood in a garage with bright yellow and blue checkered floor. Car care products on shelves in the background.
Skoda Octavia VRS 3 Year Ceramic Coating

Exterior Decontamination Wash

The exterior wash follows a methodical, three stage process to ensure the paint is free of both loose and embedded contaminants.

  1. Wheels First: The wheels were cleaned first using an iron fallout remover and dedicated cleaners to tackle stubborn brake dust and make them as clean as possible while they were still on the vehicle.

  2. Three Stage Paint Wash:

    • Pre Wash & Contact Wash: This removes loose surface dirt.

    • Chemical Wash: This crucial step removes deep iron fallout, tar spots, and other residues embedded in the paintwork.

  3. Mechanical Decontamination (Clay Bar): Finally, a mechanical clay bar was used to remove any remaining bonded on dirt, old sealants, or contamination that the wash stages couldn't pick up.


Stage 2: Correction and Enhancement

Once clean, the vehicle was blow dried from top to bottom to ensure it was thoroughly dry. A single stage machine polish was then performed.


The Purpose of Polishing

The polishing stage is where the magic happens and is critical for both aesthetic enhancement and coating longevity.

  • Defect Removal: The polish works to remove light scratches and swirls that dull the paint's finish.

  • Gloss Enhancement: It dramatically enhances the gloss levels of the vehicle's paintwork, making the blue really pop!

This machine polishing stage was carried over from the end of Day 1 into the start of Day 2 to ensure complete and uniform defect removal across all panels.

Close-up of a shiny car side mirror reflecting a person and ceiling lights. The setting is a garage with blue and gray tones.
Single Stage Machine Polish Correction Results

Stage 3: The Ceramic Coating Installation

With the paint corrected and gloss maximised, the surface is now ready for the long term protective layer Ceramic Coating


Panel Wipe for Surgical Cleanliness

  • Residue Removal: Before the ceramic coating is applied, the surfaces are panel wiped. This removes any lingering oils or polishing residues that may have been left over from the machine polishing stages.

  • Optimal Bonding: The panel wipe ensures the surface is "surgically clean," which is essential for the CarPro C.Quartz Professional Ceramic Coating to bond correctly and achieve its maximum durability.


The Three-Year Protection

The final step was the installation of the CarPro C.Quartz Professional 3 Year Ceramic Coating onto the exterior paintwork. This product forms a durable, hard shell layer that provides:

  • Exceptional gloss and depth.

  • Protection against environmental damage (bird droppings, UV rays, road salt).

  • Incredible hydrophobic properties, making the car much easier to clean.


The Result: Sensational and Protected


The client’s Skoda Octavia VRS is now looking absolutely sensational, with the factory blue colour popping and a stunning depth of gloss. More importantly, it is protected with a durable ceramic coating, ready to face the road for the next three years. We are confident our client will be over the moon when they collect it!

Ready to give your vehicle the foundation and protection it deserves? Enquire Now

Blue car in a garage with a vibrant blue and yellow theme. A race suit and equipment line the walls. Floor is checkered with blue accents.
Skoda Octavia VRS 3 Year Ceramic Coating
Blue car in a garage with blue and yellow checkered floor. Shelves with car products in the background; a plant in the corner.
Skoda Octavia VRS 3 Year Ceramic Coating
Close-up of a blue car's front end with focus on the headlight and grille. A blurred yellow and blue sign is in the background.
Skoda Octavia VRS 3 Year Ceramic Coating
Blue Skoda car rearview parked in a garage. Glossy finish reflects surroundings. Green plant and yellow-blue cloth visible in the background.
Skoda Octavia VRS 3 Year Ceramic Coating
Blue Škoda car in a detailing center on a blue and yellow checkered floor. "CARPRO Certified Detailing Center" sign visible.
Skoda Octavia VRS 3 Year Ceramic Coating


bottom of page